Technical Articles
Assortment of header and exhaust-related support articles.
Basic Installation Procedure Besides a few common tools, what is really required is the patience to do it right. Sanderson Headers are built by hand in ...
Wed, 2 Oct, 2019 at 9:58 AM
We recommend breaking in a new engine using factory manifolds or an
old set of headers. This is to prevent engines that are not optimally
tuned from dam...
Fri, 26 Jun, 2015 at 8:49 PM
Finish & Up-keep
Plain Finish
Wash headers with acetone (WARNING ~ Flammable!).
The headers should be heated to approximately 200° by using...
Fri, 26 Jun, 2015 at 8:53 PM
The Confusion of Header Terminology
The
questions "Are your headers direct-fit?" or "Do I need to modify my
down pipes to connect t...
Fri, 26 Jun, 2015 at 8:56 PM
Is silicone sealer required on the copper 2V adapters for the Ford 351C/400M headers?
As
you may already know, all of our headers for the Ford 351C ...
Fri, 26 Jun, 2015 at 8:58 PM
For those of you looking at our Lakes-style Limefire and Jayster outside
chassis headers for your street rod, I have a tech tip for you that
will save y...
Fri, 26 Jun, 2015 at 9:00 PM
BAFFLE INSTALLATION PROCEDURE:
First,
make sure you have the correct sized muffler inserts for your
application. Our 1.875" inserts are for s...
Fri, 26 Jun, 2015 at 9:01 PM
Starter clearance is a unique situation for many header installations, especially when we're installing headers on a 30-70+ year old vehicle. Just imagi...
Wed, 24 May, 2017 at 2:26 PM